Filter
Top Products
15-5
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 15 DMP Remote Control and Its Emulation
Procedures
What to Do Next
• Proceed to the “Enable IP Phone Autoregistration” section on page 15-5.
Related Topics
• Start Services, page 15-4
Enable IP Phone Autoregistration
Before You Begin
• Configure URL parameters.
Procedure
Step 1 Choose System > Cisco Unified CM, and then click Find.
Step 2 Click the name of the server whose managed IP phones should be autoregistered.
Step 3 Uncheck the Auto-registration disabled on this Cisco Unified Communications Manager check box.
Step 4 Edit the range of values that starts in the Starting Directory Number field and ends in the Ending
Directory Number field.
Step 5 Click Save.
Step 6 Stop. You have completed this procedure.
What to Do Next
• Proceed to the “Define IP Phone Service Attributes” section on page 15-5.
Related Topics
• Configure URL Parameters, page 15-4
Define IP Phone Service Attributes
Before You Begin
• Enable IP phone autoregistration.
Procedure
Step 1 Choose Cisco Unified CM Administration from the Navigation list, and then click Go.
Step 2 Choose Device > Device Settings > Phone Services.
Step 3 Click Add New.
Step 4 Enter Cast in these fields.
• Service Name
• ASCII Service Name