Filter
Top Products
21-4
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 21 Proof of Play
Procedures
Enable Syslog and NTP
Procedure
Step 1 Do one of the following.
Step 2 Stop. You have completed this procedure.
• Would you
like to
enable these
services
from Digital
Signs?
Use elements in Digital Signs to enable these services.
a.
Choose Advanced Tasks > System Tasks.
b. Create a new system task.
c. Enter a meaningful name in the Name field, such as Enable PoP access
on DMPs.
d. Choose Set from the Request Type list, and then enter this string:
init.syslog=on&init.syslog_collector=<DMM_routable_IP>&mib.save=1
&mng.reboot=1
e. Click Submit.
f. Click OK.
g. Deploy to all DMPs that should support proof of play.
• Would you
like to
enable these
services
from
DMPDM?
Use elements in DMPDM to enable these services
a.
Click Browser in the Settings list.
b. Enter the routable IP address of your DMM appliance in the Syslog
Collector IP Address field.
c. Click Apply.
d. Click NTP in the Settings list, and then choose On from the Enable NTP
Service list.
e. Enter pool.ntp.org in the Hostname 1 field, if you have not already done so.
f. Choose your locale from the Time Zone list, and then click Apply.
g. Save Configuration
h. Restart.