Filter
Top Products
14-15
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 14 Touchscreens, Projectors, and Displays
Procedures
Activate or Deactivate Resolution Autodetection
Before You Begin
• Activate HDMI autodetection.
Procedure
Step 1 Deploy the System Task event called Screen Resolution Autotection On.
OR
Deploy the System Task event called Screen Resolution Autodetection Off.
Step 2 Stop. You have completed this procedure.
Related Topics
• Elements to Control Screen Resolution Autodetection, page 14-28
Configure and Manage Equipment
Configure DMP Output Settings
• Define DMP Output Settings for Video and Audio, page 14-15
• Edit DMP Output Settings for Video and Audio, page 14-16
• Delete DMP Output Settings for Video and Audio, page 14-17
Manage Presentation Systems
• Use Simple Menus to Control Equipment That We Support Explicitly, page 14-18
–
Edit Equipment Settings That You Chose from Menus, page 14-19
–
Delete Equipment Settings That You Chose from Menus, page 14-20
• Use RS232 Syntax to Control Equipment, page 14-20
–
Edit Equipment Settings That Use RS-232 Syntax, page 14-21
–
Delete Equipment Settings That Use RS-232 Syntax, page 14-22
Define DMP Output Settings for Video and Audio
You can configure the audio and video signals that DMPs send to their attached presentation systems.
Procedure
Step 1 Choose Digital Media Players > Advanced Tasks.
Step 2 Click DMP Audio/Video Settings in the Application Types list.
Step 3 Click Add New Application.
The page is refreshed so that you can choose options and enter values.