Filter
Top Products
105
Monitoring and Controlling Projectors via a Network (for the EMP-7900)
User’s Guide
Once the mail notification settings have been
completed, click [OK].
The display will return to the Setup for Network
Projector window, so click [Set].
When the setting finished window appears, click
[OK].
The test message transmission checking window will
be displayed.
You can send a test message to the addresses that have been set.
To send a test message, click [Yes]. If you do not want to send a
test message, click [No].
The subject of the test e-mail message will be "TEST MAIL". It
will contain the following information.
Line 1 : Projector name
Line 2 : IP address that has been set for the projector
Line 3 : TEST MAIL (subject)
The settings will then be applied, and the display will
return to the window that appeared in step 2. Click
[ ] to close EMP NetworkManager.
6
7
8
9
10
TIP
We recommend you to set up a password for security. To do so, right-
click the projector icon and select "Change Password". Now, you can
change the administrator user (Admin) password.