Filter
Top Products
49
Adjusting the Screen Image
User’s Guide
Quick Corner correction can be carried out using either the projector's
control panel or the configuration menus. This procedure explains how to
use the projector's control panel to correct keystone distortion.
If using the configuration menu: "Setting" - "Keystone" - "Quick Corner"
p.85
PROCEDURE
Press the [ ], [ ], [ ] or [ ] button on the
projector's control panel.
The Quick Corner correction screen will be displayed.
Press the [Auto/Enter] button on the projector's
control panel and then select the corner to be
corrected on the screen.
You can also press the [Enter] button on the remote control to
select the corner.
Correcting Keystone Distortion so that the Projection
Area Fits the Screen Exactly (Quick Corner)
TIP
If "H/V-Keystone" is selected in the "Keystone" sub-menu of the
"Setting" menu, the "V-Keystone" or "H-Keystone" adjustment gauge
will be displayed if you press the [ ], [ ], [ ] or [ ] buttons.
p.47
When carrying out "Quick Corner" correction, select "Quick Corner"
and then make the correction. p.85
1
[ ]:Adjust
[ ] :Move next
[ESC] :Return (Press 1 second to
reset)
/
2
[ ]:Adjust
[ ] :Move next
[ESC] :Return (Press 1 second to
reset)
/
The selected
angle will
appear yellow.