Filter
Top Products
26
User’s Guide
Connecting to a Video Source
Projecting Composite Videog Images
Use a commercially- available A/V cable to make the connection.
CAUTION
When connecting the projector to other video sources, take the
following precautions.
• Turn the power off for both the projector and the video source before
connecting them. If the power for either device is on at the time of
connection, damage may result.
• Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, damage to the
connector or port may result.
• Do not bind the power cable and the connecting cable together. If
the power cable and the connecting cable are bound together, image
interference or errors in operation may result.
To video output port (yellow)
To [Video] port (yellow)
To audio output
ports p.29
A/V cable
(commercially-available)
To [Audio] port p.29
TIP
When connecting more than one device to the projector, use the
[Video] button on the remote control, or the [Video/BNC] button on
the projector's control panel to switch between devices after starting
projection. p.37