Filter
Top Products
111
Centralised Control using EMP Monitor
User’s Guide
The projector information that is generated when a problem is
detected is stored until EMP Monitor is closed. The EMP Monitor
displays will not be updated automatically even if the projector status
returns to normal. Click the "Refresh" button in the main window to
update the status.
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting
files in Windows to select ranges of projectors; for example,
click the first projector in the range, and then while pressing
down the [Shift] key on the keyboard, click the last projector in
the range to select all projectors within the specified range. If
you hold down the [Ctrl] key, projectors can be selected and
unselected each time the projector name is clicked.
Video Source :
Shows the currently selected input port.
Computer, Computer1 or InputA
Computer2 or InputB
S-Video
Video
D4 (Digital)
DVI
g or HDMI (Digital)
Error data :
If an error occurs with the projector, the status is indicated
by means of the following icons.
Lamp replacement
notification
Replace the lamp with a new one.
p.142
High-speed
cooling in progress
"Reading the Indicators" p.116
Lamp cover open
error
High internal
temperature
Internal problem
Fan related error
Sensor error
9