Filter
Top Products
94
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
User’s Guide
• The "About" menu shows the setting details for the
current input signal.
• The "Lamp" item appears as "0H" for 0–10 hours, and
after that it appears in units of 1 hour.
Computer (Analogue RGB, Digital-RGB)/
Component Video
g
/RGB Video
Video (Composite Video
g
, S-Video
g
)
"About" Menu
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Frequency
Source
V ---.---Hz
Reset Lamp Timer
H ---.---kHz
Lamp (High Brightness) 0H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate ---.-- Hz
----x ----
Computer
Input Signal
:
:
:
(Low Brightness) 0H:
:
:
:
:
:
: Auto
Execute
[ ]: Select [ ]: Enter [Menu]: Exit
Effect
Advanced2
:
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Source
Reset Lamp Timer
Video
Video Signal
:
: Auto(-----)
Execute
[ ]: Select [ ]: Enter [Menu]: Exit
Effect
Advanced2
Lamp (High Brightness) 0H:
(Low Brightness) 0H:
Sub-menu Function Default
Lamp Displays the cumulative lamp operating time for both "High
Brightness" and "Low Brightness".
•When the lamp warning period is reached, the display
characters appear in red.
0H
Reset
Lamp
Timer
Initialises the lamp operating time. When this command is
selected, the cumulative lamp operating time is reset to the
initial default value.
-
Source Displays the input source which is currently being
projected.
Input
Signal
Displays the input signal settings.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Video
Signal
Shows the video signal format.
(Does not appear when the input source is Computer, RGB
video, Component Video or EasyMP.)
-
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video
or S-video.)
-
SYNCg
Polarity
Displays the sync polarity.
(Does not appear when the input source is composite video
or S-video.)
-
SYNC
Mode
Displays the sync attributes.
(Does not appear when the input source is composite video
or S-video.)
-
Resolution Displays the input resolution.
(Does not appear when the input source is composite video
or S-video.)
-
Refresh
Rateg
Displays the refresh rate.
(Does not appear when the input source is composite video
or S-video.)
-