Filter
Top Products
130
Problem Solving
User’s Guide
You cannot connect from another computer when images are being projected during a network connection (EMP-7950 only)
EMP NS Connection starts, but a projector is not found (EMP-7950 only)
Check Remedy
Has the person making the presentation left
the meeting room without closing the
connection?
If you try to connect to a projector from a computer while Network Screen is running and the
projector is already connected to another computer, the connection to the first computer will be
terminated and the projector will then connect to the next computer.
If no projector keyword has been set in the projector or the keyword is known, it is possible to
terminate the current connection and connect to the projector by establishing a new connection from
the computer.
If a projector keyword has been set in the projector and the projector keyword is unknown, terminate
the connection from the projector and then reconnect. To terminate the connection from the
projector, press the [ESC] button on the remote control, select the "Exit" button from the displayed
menu and then press the [Enter] button on the remote control. Connect from the desired computer
after terminating the connection.
"Disconnecting from a Network Connection" in the EasyMP Network Setup Guide
Check Remedy
Is the wireless or wired LAN card inserted? Check that the wireless LAN card is correctly inserted into the card slot of the projector.
"Inserting and Removing Cards" p.17
Is the network cable connected correctly? Check that the network cable is connected correctly. If it is not connected or is connected
incorrectly, reconnect it.
Is the access lamp of the wireless LAN card
that is inserted into the projector lit green?
If the access lamp is off, remove the wireless LAN card and re-insert it.
"Inserting and Removing Cards" p.17
Is the projector displaying the EasyMP
configuration menu screen?
Network connections are disabled while the EasyMP configuration setting screen is displayed.
Close the configuration settings to return to the EasyMP standby window.
Is the computer ready for LAN card or in-built
LAN functionality to be used?
Check whether the LAN device is functioning in the Device Manager. For example, "Control panel" -
"System" - "Device Manager".
For the EMP-7950
When using the EMP-7950
connected to a wired LAN, or
when using the EMP-7900