Filter
Top Products
78
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
User’s Guide
List of Functions
• The functions in the "Video" menu apart from "Resolution" and "Video Signal" cannot be adjusted while no video signal is being input.
• The functions which appear in the "Video" menu will change depending on the type of input source being projected. Functions which are not available in the
"Video" menu for a particular input source cannot be adjusted.
"Video" Menu
Computer (Analogue RGB/RGB Video)
Computer (Digital RGB)
Video
Audio
Color Mode
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
:
:
:
:
Select
0000
0
0
0
+
-
+
-
Adjust
[Presentation ]
:
:
Resolution
Reset
Execute
:
[
]
[ ]: Enter[ ]: Select [Menu]: Exit
Reset All
About
Advanced2
Advanced1
User's Logo
Setting
Effect
Preset
Auto
Manual
Auto
Manual
Set
Adjust
Select
Video
Audio
Color Mode
Contrast
Sharpness
:
:
Select
0
+
-
Adjust
[Presentation ]
Reset
Execute
[ ]: Enter[ ]: Select [Menu]: Exit
Reset All
About
Advanced2
Advanced1
User's Logo
Setting
Effect
Auto
Manual
Brightness
0
+
-
:
Sub-menu Function Default
Position (Adjustment is only possible when analogue RGB signals
are being input)
Moves the image display position vertically and
horizontally.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel and
make the adjustment.
Depends on
connection
Trackingg (Adjustment is only possible when analogue RGB signals
are being input)
Adjusts computer images when vertical stripes appear in the
images.
Depends on
connection
Sync.g (Adjustment is only possible when analogue RGB signals
are being input)
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
•Flickering and fuzziness may also occur when the
brightness, contrastg, sharpness and keystone correction
settings are adjusted.
•You can obtain the best results if you adjust the tracking
first and then adjust the synchronization.
Depends on
connection
Brightness Adjusts the image brightness. Median value (0)
Contrastg Adjusts the difference between light and shade in the
images.
•Auto : The contrast is adjusted automatically to the ideal
level.
•Manual: Contrast is adjusted manually.
Auto
Sharpness Adjusts the image sharpness. Median value (0)