Filter
Top Products
89
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
User’s Guide
"Advanced1" Menu
Standby Mode
:
Startup Screen ON OFF
:
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Progressive
Color Adjustment
Color Temp. RGB
Rear Proj.
Language Select [English]
Reset
Execute
Adjust
ON OFF
:
:
Ceiling ON OFF
:
[Menu]: Exit[ ]: Enter[ ]: Select
Effect
Advanced2
Network ON Network OFF
:
OFF Video Film/Auto
Sub-menu Function Default
Startup
Screen
Sets whether the startup screen is displayed or not.
To change the user's logo, you need to record your own
logo. p.148
•When this setting is changed, turn the power off, and when
the cool-downg period has finished, turn the power back
on again. The new setting will be applied after the power
turns back on.
•This cannot be changed between enabled ("ON") and
disabled ("OFF") if the "User's Logo Protect" function of
Password Protect has been set to "ON". Set "User's Logo
Protect" to "OFF" and then save the new user's logo.
p.61
ON
Progressive
(Setting is only possible when composite video, S-Video or
component video (525i, 625i) signals are being input)
Converts interlacedg (i) signals to progressiveg (p) signals.
When set to "OFF", interlaced signals are projected without
conversion.
•OFF : IP conversion is carried out for each field
window. This is ideal for images with a lot of
movement.
•Video : The film judgment functiong is turned off.
•Film/Auto : This setting is for normal use. The source is
automatically judged to be a video source or
not, and if it is a video source, the 3-2 pull-
down functiong operates and the images are
reproduced as film images with no loss in
colour from the original.
Film/Auto