Filter
Top Products
44
Adjusting the Screen Image
User’s Guide
The front adjustable foot and the rear adjustable feet can be extended and
retracted to adjust the tilt of the projector to a maximum of 12º upward and
4º downward.
PROCEDURE
While pulling the foot adjust lever at the front of the
projector, lift up the front of the projector to extend the
front adjustable foot.
Extend the front adjustable foot until the desired angle is obtained,
and then release the foot adjust lever.
To retract the front adjustable foot, gently push down on the projector
while pulling the foot adjust lever.
Adjusting the Feets
TIP
If you use the front adjustable foot and the rear adjustable feet to
adjust the tilt of the projector, it may cause keystone distortion to
appear in the projected images. If this happens, the Auto Keystone
function will operate to automatically project images without keystone
distortion.
p.45
Foot adjust lever (Front)
TIP
If the projector is tilted vertically or horizontally, turn the bases of the
rear adjustable feet to make fine adjustments to the height of the
projector. When the projector is tilted horizontally, the correction may
not be carried out correctly.
Extend Retract
Rear
adjustable foot