Filter
Top Products
18
Inserting and Removing Cards (EMP-7950 only)
User’s Guide
Removal
PROCEDURE
Press the eject button to the right of the card slot.
The eject button will pop out.
Press the eject button again.
Enough of the PC card will be ejected so that you can grasp the
edge of the card and pull it straight out of the slot.
CAUTION
• Do not remove the wireless LAN card while the access lamp of the
wireless LAN card is flashing green, otherwise it may damage the
wireless LAN card.
• Do not remove a memory card while the access lamp of the
projector's card slot is flashing green, or while projecting a scenario.
Doing so may damage the memory card itself or data in the card.
• The PC card gets hot during and immediately after projector use.
Handle the card carefully when removing it from the card slot to
avoid personal injury or burns.
• When you wish to remove a memory card while using CardPlayer, be
sure to close CardPlayer before removal. CardPlayer may
malfunction if a memory card is removed without closing
CardPlayer first. "Closing CardPlayer" in the EasyMP
Operation Guide
1
Eject button
Access lamp
2
CAUTION
Be sure to press the eject button back in to prevent it from being
broken or damaged.