Filter
Top Products
28
Connecting to a Video Source
User’s Guide
Projecting RGB Video Images
RGB video is used when projecting RGB signals from a video source other
than a computer that is connected to the projector. Either of the following
two connection methods can be used. Use whichever method is suitable for
the video equipment's port.
Use the accessory computer cable to make the connections.
If the RGB Output Port is a Mini D-Sub 15-pin Port (Example)
To RGB output port
To [Computer] port (blue)
Computer cable
(accessory)
TIP
• Image sources are auto-detected according to the input signals.
Depending on an output signal of a computer, the image may be
projected in unnatural colours. In such case, set the "Computer
Input" in the configuration menu to "RGB". p.86
• When connecting more than one device to the projector, use the
[Comp] button on the remote control, or the [Computer/DVI] button
on the projector's control panel to switch between devices after
starting projection. p.37