Filter
Top Products
87
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
User’s Guide
Sub-menu Function Default
Sleep
Mode
Sets the energy saving operation when no video signal is
being input.
•When set to "ON", projection stops automatically and after
the cool-downg period is finished, the projector changes to
sleep mode (standby mode) if no operations are carried out
for approximately 30 minutes while the "No Signal."
message is being displayed. (The indicator lights
orange.)
•Projection starts again when the [Power] button on either
the remote control or the projector's control panel is
pressed.
OFF
Reset Resets all adjustments values for the "Setting" menu
functions except for the "Computer Input" and "BNC Input"
settings to their default settings.
This cannot be reset to the initial setting if the "User's Logo
Protect" function of Password Protect has been set to "ON"
and "No-Signal Msg." or "A/V Mute" is set to "Logo".
p.61
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings. p.95
-