Filter
Top Products
107
Monitoring and Controlling Projectors via a Network (for the EMP-7900)
User’s Guide
The following IP Address Setup window will be
displayed.
You should make the following settings when manually
connecting a projector.
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.
The projectors that have been recorded will be
displayed in the projector list display area.
Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been registered by
EMP Monitor will be displayed in the projector list display
area.
IP address
g
Enter the IP address for the projector to be connected.
[Add] button
Adds the projector with the specified IP address to the
projector list display area.
[Connect] button
Connects the projector with the specified IP address
to the network.
[Cancel] button Cancels entry of the IP address.
3
Sharing EMP Monitor settings
1
2
Projector
address...
EMP482800...
192.168.0.8
PROJECTOR01
169.254.10.176
PROJECTOR02
169.254.10.177
PROJECTOR03
169.254.10.178
Room201
169.254.207.64
Room202
169.254.207.65
Room301
169.254.207.66
Room302
169.254.207.67
Room303
169.254.207.68
Room401
169.254.207.69
Indicates a projector that
has been found using
automatic search
Indicates a projector that has
been registered using EMP
Monitor, or that has been
manually registered using
EMP NetworkManager.
Indicates a projector that has
been registered by specifying
the IP address
g manually.
3