Filter
Top Products
September 1999
2
Options and Accessories
Clarity’s display products can be upgraded with several accessories. See your
reseller or visit www.ClarityVisual.com for a current listing of available options.
! Ultra-Thin Mullion Screen – There are three screen
options:
• The standard screen has a mullion 1/8
”
(3 mm) wide.
The mullion is a strip of sheet metal surrounding the
screen which holds it in place.
• The Ultra-Thin Mullion Screen, or mullionless screen,
does not have the 1/8” (3 mm) strip of sheet metal
around the screen. The edge of the screen goes right
to the edge of the display unit, which makes the lines
between display units almost invisible in the finished
video wall.
• BlackScreen™, a mullionless screen as above, but
with a higher contrast ratio.
! S/300 - Video Input Module
This adds three new inputs – composite and S-video in
NTSC, PAL, and SECAM – and a 15.75 kHz line-doubling
capability for RGBS.
! Clarity’s Big Picture™
Big Picture spreads a single video source over an entire
video wall, eliminating the need for an external processor.
(All display units in the video wall must have this option.)
The S/300 option, above, is included with Big Picture.
! SRT-100 Screen Removal Tool
This tool makes it easy to remove the normal mullion
screens when the displays are used in video walls, where
units are placed directly adjacent to each other. The SRT-
100 minimizes the chance of damaging the screen and the
screen’s latches. (Used with standard mullion screens
only.)
! SAT-500 Screen Alignment Tool
This tool is essential to properly position the display units
with the Ultra-Thin Mullion Screen in a video wall. It
assures the correct spacing between adjacent screens in
the assembled video wall. (Used with Ultra-Thin Mullion
screens only.)
! BAS-520 Base for the WN-5230-S
The BAS-520 provides a permanent attachment to
flooring.