Filter
Top Products
WN-5230-S VideoWall User’s Guide
93
Color Balance † *
Wht Gry
Wht (white) values 000 – 031; Gry (gray) values 000-007
Red 031 007
Left-right arrows change Red values of White or Gray Color Balance
Green 031 007
Left-right arrows change Green values of White or Gray Color
Balance
Blue 031 007
Left-right arrows change Blue values of White or Gray Color Balance
Curtain Select
[ ] Curtain On
Enter turns Curtain on and off. X means Curtain is on and no video
will be displayed.
Lamp Hours: xxxx:xx
Shows hours:minutes lamp was on since last Lamp Hours Reset
System Hours: xxxx:xx
Shows hours:minutes system (Electronics Module) has been used
Reset Lamp hours
[ ] Yes [ ] No
To reset lamp hours, use left-right arrows to highlight
[ ] Yes
, then
press
Enter
. New menu (below) asks for confirmation.
Was Lamp Changed?
[ ] Yes [ ] No
To confirm lamp hours reset, use left-right arrows to highlight
[ ] Yes
, then press
Enter.
ID ‡
Group 0
Shows Group ID of this display unit; hexadecimal number
Unit 2
Shows Unit ID number of this display unit; hexadecimal number. Unit
number times 2 equals lamp turn-on delay time in seconds. Group
and Unit numbers are both used for Wall Processor calculations.
Misc Control
[ ] Sharpness
Turns Sharpness on and off (should be on for PC and MAC)
[ ] Buzzer Enable
Turns Buzzer (at each press of a remote control button) on (X) and off
[ ] Flip Horz
Reverses image left-right
[ ] Flip Vert
Reverses image up-down
[ ] Auto Lamp On
When X is present, lamp tries to turn on after the standby delay has
elapsed.
[ ] Test Patterns
Opens Test Patterns menu; patterns are internally generated.
Test Patterns
[ ] Off
No test pattern; external video passes through to screen
[ ] White
Internal White field
[ ] Black
Internal Black field
[ ] 50% Gray
Internal Gray (50% white) pattern
[ ] Red
Internal Red field
[ ] Green
Internal Green field
[ ] Blue
Internal Blue field
[ ] Red Geometry
Internal red on white pattern
[ ] Cyan Geometry
Internal cyan on white pattern
[ ] Black Geometry
Internal black on white pattern
[ ] Gray Scale
Internal pattern ranging from black to white (left to right)
Monitor Select ‡
[ ] IR Disabled
Prevents stray infra-red radiation from disturbing Electronics Module.
Also used to turn off IR reception in some units so remote control
does not change them. When X is present, only ID button on remote
control will affect the unit.