Filter
Top Products
WN-5230-S VideoWall User’s Guide
101
RS-232 Control Items
Notes:
* Indicates an ASCII character is returned from the cube in this location.
$ Indicates 8-bit data is returned from the cube in this location
# Indicates 8-bit data is transmitted to the cube in this location
1 ACK or NCK will be transmitted following the video cube receiving a non-global instruction. For
commands which request data transmitted back the transmitted response will be the
acknowledge.
“1” is the numeral; “I” is the letter
Function
RS-232 COMMANDS
Inc Dec
RS-232
DATA
Get Set
Comments
System Controls
Power / Stand by PON POF PO* Run state PON
Standby state POF
Lockout state POX
Any unknown state PO?
PO* returns PON, POF, POX
Frequency Adjust FRU FRD FR$ FW# $ and # = 0 - 126
Phase Adjust PHU PHD PR$ PW# $ and # = 0 - 31
V-Position Up / Down VPU VPD VR$ VW#
H-Position Left/Right HPL HPR HR$ HW#
V-Image Control Normal/Reversed VF0 VF1 VF* 0 = normal, 1 = reversed
H-Image Control Normal/Reversed HF0 HF1 HF* 0 = normal, 1 = reversed
Curtain CON COF CO* CON = on, COF = off
Sharpness SON SOF SO* SON = on, SOF = off
Buzzer BON BOF BO* N = on, F = off
IR Remote Enable/Disable ION IOF IO* N = on, F = off
Startup Delay ST1 ST0 ST* 0=3minutes / 1=90seconds
Monitor ID Menu Display MID Display monitor ID dialog box
Hours Menu Display LHR Display the hours dialog box
Read Lamp Hours (high byte) LH$
Read Lamp Hours (low byte) LL$
Lamp Hours Reset LRS Reset Lamp hours to zero
Read System Hours (high byte) TH$
Read System Hours (low byte) TL$
Clear Display Menus CLM Clears all menus with one command
Source Controls
Select VGA Input IN* IN1
Select MAC Input IN* IN2
Select RGBS 9-pin Input IN* IN3
Select RGBS BNC Input IN* IN4
Select Composite Video Input IN* IN5
Select S-Video Input IN* IN6
Auto-select the mode of the source ATO
Select mode 0 IM1
Select Mode 1 IM2
Select Mode 2 IM3
Select Mode 3 IM4
Read Input Mode IM*
Save All Settings SAA
Save VGA Settings SA1
Save MAC Settings SA2
Save RGBS 9-pin Settings SA3
Save RGBS BNC Settings SA4
Save Composite Video Settings SA5
Save S-video Settings SA6