Filter
Top Products
WN-5230-S VideoWall User’s Guide
41
Set the Sharpness
Source Select
Frequency
Phase
Input Level
Position
Zoom
Wall Processor
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Misc Control
[X] Sharpness
[X] Buzzer Enable
[ ] Flip Horz
[ ] Flip Vert
[ ] Auto Lamp On
[ ] Test Patterns
Use the Sharpness menu to toggle Sharpness On/Off. The sharpness
controls an internal electronic filter that reduces some types of video noise. It
will soften the image when it is not checked and allows the video to pass
unaffected (not softened) when the box is checked. In general, the
sharpness should be off (no X) for composite and S-video sources, and on
(with X) for PC, MAC, or RGBS sources.
1. Press the remote
control MENU
button
Displays the main menu.
2. Go to the Misc
Control menu
Use the Up/Down arrow buttons to scroll down to the Misc
Control item and then press the ENTER button to open it.
3. Select or de-select
Sharpness
With the Sharpness option selected, the ENTER button
will toggle Sharpness on and off. On for PC, MAC, RGBS.
Sharpness has no effect on Composite or S-video.
4. Exit the menu
Pressing the PREV MENU button will exit the menu.