Filter
Top Products
WN-5230-S VideoWall User’s Guide
61
Monitor Select
Disables most remote functions on the display to prevent the unit from
unintended adjustment via the remote control.
1. Press MON SEL
on the remote
The Monitor Select menu is displayed.
2. Enable Monitor
Select
Press the ENTER button to enable the Monitor Select
feature.
To restore full remote functionality, follow steps 1 and 2 again to disable the
Monitor Select feature. Monitor Select is not available on the main menu.
ID
This menu item displays the current Monitor ID address of the WN-5230-S.
The Monitor ID is set with the 2 Monitor ID knobs on the back of the display.
The Monitor ID menu displays the address as the Group and Unit which
corresponds with the knob settings on the back of the display. ID is not
available on the main menu.
1. Press ID on the
Remote
Displays the Monitor ID position as selected by the
Monitor ID switch in the rear of the unit.