Filter
Top Products
Clarity Visual Systems
September 1999
90
Menu Selection Description
WN-5230-S may be power cycled without loosing the settings.
Recall Config
Recalls previous user-saved configuration settings.
Reset Config
Resets all of the display’s settings to the factory defaults.
Menu Selection Description
Misc Control
Sharpness:
Buzzer Enable:
Flip Horz:
Flip Vert:
Auto Lamp On:
Test Patterns:
When unchecked, a low pass filter is present in the
signal path. When checked, the low pass filter is
bypassed.
Turns on or off the function-indicator buzzer.
Flips the image from right to left.
Flips the image from top to bottom.
As soon as AC power is applied to the WN-5230-S,
the display will automatically turn on after the 30
second standby-delay has elapsed (plus the Monitor
ID delay time) if this box is checked.
Opens a menu with internally generated test
patterns. Note: These patterns cannot be used to do
Input Level adjust.
About
Clarity Visual Systems (or OEM) address and phone number; firmware
version
SOURCE ABSENT
This screen message is displayed when no signal is detected on the source
that is presently selected. If this message is displayed, verify that the source
is outputting a video signal and verify that the video cable is plugged in.