Filter
Top Products
Clarity Visual Systems
September 1999
86
Rear Panel Connectors
Connector Description
MAC
Macintosh II data signal input, 800x600 or 640x480 pixels.
15-pin D-Sub, female.
PC
IBM-compatible SVGA or VGA signal input, 800x600 or
640x480 pixels. 15-pin high-density D-Sub, female.
LOOP THRU
The selected input is output to this 15-pin high-density
D-Sub, female connector (but see exception below). The
format of the Loop-thru data is same as the source data. PC
and MAC will have RGB with separate H-Sync and V-Sync.
RGBS with separate composite sync will come out RGBS
with the composite sync on the connector’s H-Sync pin and
separated V-Sync on the V-Sync pin. RGB sync-on-green
sources will loop-thru as RGB-sync-on-green, plus
composite sync on the H-Sync output pin and separated V-
Sync on the V-Sync pin. If the selected input is Composite
or S-Video, the Loop-thru connector has no output.
Composite and S-Video have their own separate loop-thru
connectors.
RGBS
(9-pin D-Sub, male)
Data input from a 31.5 kHz device (such as scan-doubled
NTSC video). 9-pin D-Sub, male input. This input is
separate from the BNC RGBS input. Data can be cabled to
both the 9-pin D-Sub and the BNC connectors and selected
in the Source menu. With some options this port will also
accept component 15.75 kHz video. Sync can be composite
sync or sync on green.
RGBS
(R, G, B, Sync;
4 BNC connectors)
Data input from a 31.5 kHz device (such as scan-doubled
NTSC video). BNC, female connectors. This input is
separate from the BNC RGBS input. Data can be cabled to
both the 9-pin D-Sub and the BNC connectors and selected
in the Source menu. With some options this port will also
accept component 15.75 kHz video. Sync can be composite
sync or sync on green.
S-VIDEO
IN = NTSC, PAL or SECAM S-Video
OUT = buffered output of the input signal
COMPOSITE
IN = NTSC, PAL or SECAM composite video
OUT = buffered output of the input signal
RS-232 IN
RS-232 control input from a direct computer link or looped
from the RS-232 OUT of another display, when controlling
multiple displays from one computer. 9-pin D-Sub, female.
RS-232 OUT
RS-232 control output connects to the RS-232 IN on
another display, when controlling multiple displays from one
computer. 9-pin D-Sub, male.