Filter
Top Products
5-56 8. Toyopuc PLC
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
Screen Editing (Memory Input)
When [Split Data Area] is selected for [Trans. Mode], the [PRG No] setting is available in the [Memory
Input] dialog.
• Range for [PRG No.]: 1 to 3
Memory TYPE Remarks
D (data register) 0
R (link register) 1
B (file register) 2
N (current value register) 3
X (input relay) 4 WX as word device
Y (output relay) 5 WY as word device
M (internal relay) 6 WM as word device
K (keep relay) 7 WK as word device
L (link relay) 8 WL as word device
T (timer/contact) 9 WT as word device
C (counter/contact) 10 WC as word device
U (extensional data register) 11
H (extensional set value register) 12
EN (extensional current value register) 13
EX (extensional input relay) 14 WEX as word device
EY (extensional output relay) 15 WEY as word device
EM (extensional internal relay) 16 WEM as word device
EK (extensional keep relay) 17 WEK as word device
EL (extensional link relay) 18 WEL as word device
ET (extensional timer/contact) 19 WET as word device
EC (extensional counter/contact) 20 WEC as word device
V (special register) 21 WV as word device