Filter
Top Products
[Notes on Maintenance and Operation]
• Hakko Electronics Co., Ltd. is not responsible for any damages resulting from repair, overhaul or
modification of MONITOUCH that was performed by an unauthorized person.
• Do not use thinners for cleaning because they may discolor the MONITOUCH surface. Use
alcohol or benzine commercially available.
• Do not use a sharp-pointed tool when pressing a touch switch.
• Only experts are authorized to set up the unit, connect the cables or perform maintenance and
inspection.
• MONITOUCH is equipped with a lithium battery. Lithium batteries contain combustible material
such as lithium or organic solvent. Mishandling may cause heat, explosion or ignition resulting
in fire or injury. Read this manual and related manuals carefully and handle the lithium battery
correctly as instructed.
• If a data receive error occurs when MONITOUCH and the counterpart (PLC, temperature
controller, etc.) are started at the same time, read the manual for the counterpart unit and handle
the error correctly.
• Switch resolution of the MONITOUCH V7 series is determined by
the analog-type resistance film. Do not press two or more
positions on the screen at the same time.
If two or more positions are pressed at the same time, the switch
located between the pressed positions activates. Please take
note of this.
[Notes on Disposal]
• At the time of disposal, MONITOUCH must be treated as industrial waste.
CAUTION
F1
F2
F3
F4
F5
F6
F7
SYSTEM
POWER
SWITCH
Pressing two positions at the same time
activates the switch in the center.