Filter
Top Products
2
1. Operation of V7 Main Menu 2-19
MONITOUCH Operations
When [Display --> Card] is Selected:
1. When [Display --> Card] is selected, the “Card Transfer” screen is displayed.
2. Check the folder name and CF card file information, and press the [Start] switch.
* When the access folder name of screen data is the same as that in the CF card, the CF
card file information is indicated on the screen, and data in the V7 series overwrites the
CF card data. Note that the CF card data is lost when data in the V7 series overwrites.
When the CF card file information is blank, a new file “DSP0000.BIN” is created in the
DSP folder.
3. During data transfer, the [Start] switch changes into [Busy] and flashes. When data has
been transferred successfully, the following window is displayed.
Press the [OK] switch. The CF card file information shows data that has been
transferred. If any other message is displayed, refer to page 2-23.
4. Press the [Return] switch. The “Card Menu” screen is displayed again.
Card Transfer
CF Card File Infomation
Folder Name: AAAAAAAA
Rest Size: 29437KB
Return
Start
Display
Card
Sys. Program
Version
Font Date
Version
I/F Driver
Version
Screen PLC Type
Screen Comment
Access
DSP0000.BIN
2002-03-20 10:58:56
: V710/V712
: 1.010
: ENGLISH
: 1.300 / 1.010 / 1.000
: GENERAL
: 1.240
: GENERAL
:
Indicates the name of the currently
selected folder.
Indicates the free space in the CF card.
Starts transferring data
[Display --> Card].
Flashes during communication with the CF card.
Moves back to the previous screen.
Indicates the information of the currently selected folder.
If there is no screen data, this field becomes blank.
OK
Work normally finished.