Filter
Top Products
1-38 15. Printer Connection (PRINTER)
Connecting Cable
• To connect the V7 series to a printer, use Hakko Electronics’ printer cable “V7-PT” 2.5
m for 20-pin parallel interface.
Compatible Printer Models
Control code system:
• NEC PC-PR201 series compatible with MS-DOS computer
• EPSON ESC/P24-J84, ESC/P-J84, ESC/super function compatible with
MS-DOS computer
• CBM292/293 CBM’s line thermal printer (Screen hard copying is not possible.)
Barcode printers:
(It is not possible to print a screen hard copy, data sheet or sampling data.)
• MR400 Sato’s barcode printer “MR400 series”
Connection with Printer through Serial Interface
• To connect a printer through serial interface, connect the cable to a modular jack
(MJ1/MJ2).
• Refer to the specification sheet of the printer to be used for the connecting cable for
serial interface. For information on MJ1/MJ2 signals, refer to page 1-29.
• When two printers are connected through parallel interface and serial interface, the one
connected to MJ1/MJ2 (refer to page 1-29 for the setting) takes precedence.
• Printer models and available print functions are the same as those for parallel interface.
F1
F2
F3
F4
F5
F6
F7
SYSTEM
POWER
V7 series Printer
Half-pitch, 20-pin Centronics, 36-pin