Epson V7 Flat Panel Television User Manual


 
2-22 1. Operation of V7 Main Menu
When [Display <-- Card] is selected, the following screen is displayed.
1) To change another folder, press the [Select Folder] switch. (The folder name
must be “SRAM0000.BIN.”)
2) The “Select Folder” screen is displayed as shown on page 2-17. Select the
desired folder (refer to page 2-17), and press the [OK] switch.
3) Moves back to the “SRAM Transfer” screen.
4. Starting Data Transfer
Check the folder name, free space and transfer selection, press the [Start] switch. Data
transfer is started.
5. Ending Data Transfer
When data has been transferred successfully, the following window is displayed.
Press the [OK] switch. If any other message is displayed, refer to the next page.
6. Pressing the [Return] switch moves back to the “Card Menu” screen.
SRAM Transfer
CF Card File Infomation
Access
Folder Name:CCCCCCCC
Rest Size: 29954KB
Return
Start
Select Folder
SRM0000.BIN2002-04-01
Display
Card
12:51:26
Indicates the free space in the CF card.
Used for checking or renaming folder
names.
Starts transferring data
[Display <-- Card].
Moves back to the previous screen.
Indicates the name of the currently selected file.
Indicates the name of the currently
selected folder.
Flashes during communication
with the CF card.
OK
Work normally finished.