Filter
Top Products
Operation
104
Turning On the Power
After installing the DVR (See Chapter 2, Installation), it is ready to record.
Press POWER. The unit takes approximately 60 seconds to initialize.
Live Monitoring
As soon as the DVR completes its initialization process, live action video shows on the
attached monitor. The default mode is to display four cameras at the same time.
Changing Live Monitoring Views
Full Screen Display
Press any camera button to display that camera’s image full screen.
Multi-View Displays
Press QUAD/SEQUENCE on the front of the DVR to toggle between quad (2x2) display
mode and sequence mode.
Freezing the Live Monitoring Image
Press in the Live Monitoring mode to freeze the current image until you press
again. The screen displays when the DVR is in Freeze mode.