Honeywell HRSD4 DVR User Manual


 
Configuration
Document 800-00919 Rev F 63
02/08
Note When the DVR is in the Panic Recording mode, it ignores the
time-lapse or event recording settings and follows the panic
recording settings.
Note The maximum panic recording speed is 30 images per second
(25 ips for PAL) when the resolution is set to Standard. However,
when set to High, the recording speed decreases to 15 images
per second (12.5 ips for PAL).
Note When the DVR is in the Panic Recording mode, the RECORD
LED on the front panel flickers and the displays on each
camera screen.
Setting the DVR for Auto Deletion
1. Highlight the first field beside Auto Deletion.
On Disk Full Alarm Out Highlight the field beside On Disk Full Alarm Out and
press to toggle between On and Off.
On Panic Recording
Speed
Press Panic on the front panel to open the Panic
Recording mode. In the Record Mode Setup screen,
you can program the recording speed, quality, and
duration for when the DVR is in the Panic Recording
mode.
Set On Panic Recording Speed from 0.5 to 30 ips (25
ips PAL).
On Panic Recording
Quality
Set On Panic Recording Quality from Very High,
High, Standard, and Low.
On Panic Recording
Duration
Set On Panic Recording Duration from 5 to 60
minutes. The panic recording stops automatically
according to the preset duration as long as the Panic
button has not been pressed to stop the panic
recording. Select No Limit if you want to stop panic
recording manually.
Table 3-8 Record Mode Setup Screen Options
Option Function