Filter
Top Products
Configuration
Document 800-00919 Rev F 75
02/08
Figure 3-42 Text-In Event Action (Record) Setup Screen
1. Highlight the Sched field and press . A schedule screen appears. Set the
schedule as described earlier (see Scheduling an Alarm Output on page 59).
2. Highlight the Camera field and press . A camera selection screen appears.
Select the number of the camera you would like to associate with the text-in
device. Then select Close and press .
Note You cannot associate multiple cameras with a text-in device.
3. Highlight the Speed field and select from the drop-down menu the number of
images per second you would like to record. You can select from 0.50 ips to 30.0
ips.
4. Highlight the Quality field and select from the drop-down menu the image quality
you want for the recording. You can select from Very High, High, Standard, and
Low.
5. Highlight the Dwell Time field and set the length of time you would like to record
for the text input. You can select from 1 to 300 seconds.
6. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Text-In Event Action (Alarm Out) Setup Screen
The DVR can be set to react to text-in input by activating an internal buzzer or external
alarms.
1. Highlight Text-In Event Action (Alarm Out) in the Event Action menu and press
. The Text-In Event Action (Alarm Out) setup screen appears.