Filter
Top Products
Configuration
82
Figure 3-49 Main Monitoring Setup Screen
Setting Up the DVR Network Connections
In the Network Setup screen you can set up the DVR for LAN and modem connections.
You can access the Network Setup screen in two ways:
• From the Main menu, select Network, and then Network Setup.
OR
1. From the Main menu, select Quick Setup and press . The Quick Setup screen
appears.
2. Select the field beside Quick Setup, and press to toggle On. More fields
become active.
3. Highlight Network Setup and press . The Network Setup screen appears.
Option Function
Sequence Dwell
Time
Highlight the field beside Sequence Dwell Time and press
. You can adjust the sequence dwell time from 3 to 60
seconds.
Note The DVR does not sequence the camera that are experiencing video loss.
Event Monitoring Highlight the field beside Event Monitoring and press to
toggle between On and Off.
When set to On, video from the lowest numbered camera
among those connected with the event-detected sensor
displays full-screen on the main monitor for the preset dwell
time.
Event Monitoring
Dwell Time
Highlight the field beside Event Monitoring Dwell Time and
press . You can adjust the event monitoring dwell time
from 3 to 60 seconds.