Filter
Top Products
Configuration
Document 800-00919 Rev F 43
02/08
4. Delete dates by highlighting the X beside the date and pressing .
Note Holidays that do not fall on the same date each year should be
updated once the current year's holiday has passed.
Synchronizing with a Standard Time Server
You can set up time synchronization between the DVR and standard time servers that
are available in most time zones and countries, or between the DVR and another DVR.
1. Highlight the Time Sync… field in the Date/Time Setup screen, and press .
The Time Sync screen appears.
Figure 3-12 Time Sync Screen
2. Highlight the field beside Automatic Time Sync and press to toggle the
Automatic Time Sync On and Off.
3. Highlight the field beside SNTP Server and press . Change the numbers by
highlighting them and using the Up and Down arrows to increase or decrease the
number value.
4. Highlight the field beside Interval and press . Set the time interval for
synchronization from 30 to 300 minutes.
The field beside System Clock displays the time setting of the DVR.
The field beside Server Clock displays the time setting of the time server.
5. Highlight Update and press to update the server clock.
Note The Server Clock displays " - " when the DVR cannot load the
time information from the time server.