Filter
Top Products
Configuration
Document 800-00919 Rev F 55
02/08
Note If networking is configured by the external modem, the text-in
cannot be set up. Set the DVR for LAN connections (see Setting
the Connection Type on page 83) and set up text-in for RS-232C
port (see Communicating with External Devices Using the
RS-232C Port on page 60).
Note Text-in data can not be recorded during clip copy.
2. Highlight the field beside Use Text-In and press to toggle between On and
Off.
3. Highlight the box next to Multi-devices on 1 channel and press to toggle
between On and Off. When turned On, the DVR supports up to 4 text inputs.
If you turn On Multi-devices on 1 channel, then you can select only VP Filter
from the Product Type list.
If you turn Off Multi-devices on 1 channel, then you can select Generic Text,
EPSON-POS, or VP Filter from the Product Type list.
4. Highlight the field beside Product Type, and press .
5. Select your device from the list. Your choices are:
•Generic Text
•EPSON-POS
•VP Filter
Settings for Generic Text, EPSON-POS, and VP Filter
Note VP Filter, Generic Text, and EPSON-POS devices are currently
supported.
The following description is for VP Filter, Generic Text, and EPSON-POS devices. The
screen changes for different types of text input devices, and there are different
parameter boxes for you to enter information.