Honeywell HRSD4 DVR User Manual


 
Configuration
Document 800-00919 Rev F 33
02/08
ZOOM/PTZ Button Press Zoom/PTZ to open the Pan/Tilt/Zoom screen, where you can
control properly configured cameras.
In the PTZ mode, press PTZ to enter the digital zoom mode. While
in the digital Zoom mode, press PTZ again to return to the live
monitoring mode.
If a PTZ device is not installed, you can press PTZ to directly enter
the digital zoom mode.
In the playback mode, press PTZ to enter the digital zoom playback
mode.
Note When the DVR is in the PTZ mode, a white line appears around the image.
Note In the digital zoom mode and digital zoom playback mode, a small bright box lays over the
image. The box indicates the area to be enlarged.
PANIC Button Press Panic to activate panic recording. The DVR records video
regardless of the time-lapse or event recording schedules.
Press Panic again to release the panic recording.
Note When the DVR is in the Panic recording mode, the RECORD LED flickers and displays on
each camera screen.
ENTER/PAUSE Button Use Enter/Pause to select a highlighted item or complete an entry
that you have made.
In Live Monitoring mode, press Enter/Pause to freeze the current
live screen. The screen displays . Press Enter/Pause again to
return to the live monitoring mode.
In the Playback mode, press Enter/Pause to pause the video. The
screen displays . Press Enter/Pause again in the pause mode to
return to the live monitoring mode.
In the Digital Zoom mode, press Enter/Pause to enlarge a specific
area of the screen. A displays on the enlarged screen.
Arrow Buttons Use the arrows to navigate through menus and GUI. You can also
use them to control Pan and Tilt in the PTZ mode, and to move the
specific area of screen that you want to enlarge in the digital zoom
mode.
In the playback mode, the up arrow to select the next image, and the
down arrow to select the previous image.
In the playback mode, press to play video backward at high
speed. Press
again to toggle the playback speed from ,
, and . The screen displays , , and
respectively. Press to play video forward at high speed. Press
again to toggle the playback speed from , , and .
The screen displays , , and respectively.
Entering Playback mode from Live Monitoring mode can be
protected by a user password.
Table 3-1 DVR Front Panel Controls
Control Function