Filter
Top Products
Configuration
Document 800-00919 Rev F 85
02/08
Changing the Image Quality for Transfer
You can program the image quality for transferring images and video to the RASplus
(Remote Administration System).
Highlight the field beside Remote Quality and press . The image quality ranges
from Very High, High, Standard, and Low.
Setting Up Connectability Using the Network Setup Screen
In the Network Setup screen, select Setup.... The LAN (Manual) Setup screen appears.
Figure 3-51 LAN (Manual) Setup Screen
Highlight the field beside Type and press to select from Manual, DHCP, and
ADSL (PPPoE).
Setting LAN Parameters Manually
1. Select Manual from the Type field to set up LAN parameters manually.
Note You need to get the appropriate IP Address, Gateway, and
Subnet Mask from your network administrator.
2. Change the numbers by highlighting them and using the Up and Down arrows to
increase or decrease the number.
The factory default LAN settings are:
IP Address:192.168.1.129
Gateway: 192.168.1.254
Subnet Mask:255.255.255.0