Filter
Top Products
Configuration
46
Figure 3-14 System Check (Alarm Out / Notify) Screen
2. Highlight the field under the Alarm Out heading and press . A drop-down
menu displays available alarm outputs for the recording problem.
3. Highlight the desired alarm output from the external alarm out terminal or internal
buzzer, and press .
Note Alarm Out cannot be set to Check Point - System.
4. Highlight the field under Notify and press . This toggles between On and Off.
When it is On, the DVR notifies the remote site of its System (Good) and Record
(Bad).
Setting Up the DVR for Storage
Highlight Storage in the Main menu and press . The Storage setup screen appears.
Figure 3-15 Storage Setup Screen