Filter
Top Products
Configuration
Document 800-00919 Rev F 37
02/08
Note Quick Setup mode is released automatically when the user
changes the DVR settings remotely using the RASplus (Remote
Administration Software) program.
Setting Up Your DVR Using the Normal Setup Screen
Press MENU to enter the setup screen. If the Quick Setup screen appears, turn it off as
described above (see Quick Setup On/Off on page 36). The Normal Setup screen gives
you access to all the HRSD4 DVR setup screens.
Figure 3-5 Normal Setup Screen
Table 3-3 Quick Setup Screen Options
If you select... A screen opens where you can...
System Information Set up system information
Storage Check the storage status
Camera Set up camera information
Network Setup Set up network information
Password Change passwords
Date/Time Set the time and date
System Shutdown Shut down the DVR. When shutting down the DVR, you need to
confirm that you want to shut down the unit by entering an
administrator password.