Filter
Top Products
Configuration
Document 800-00919 Rev F 87
02/08
Caution When changing the port settings, you must change the port
settings on a PC running RASplus as well. Refer to the RASplus
manual for details.
6. Save your changes and return to the Network Setup screen by highlighting OK
and pressing . Select Cancel to exit the screen without saving the changes.
Setting Up LAN Connectivity Using the Current IP Address
Select DHCP from the Type field and highlight OK to read the current IP Address of the
DVR configured by DHCP (Dynamic Host Configuration Protocol) network.
Figure 3-53 LAN (DHCP) Setup Screen
Setting Up LAN Connectivity Using ADSL
1. Select ADSL (PPPoE) to set up the ADSL network. The LAN (ADSL) Setup screen
appears.
Note ADSL and modem cannot be configured at the same time. If the
DVR is networked via modem, the ADSL (PPPoE) can not be
selected.