Filter
Top Products
Configuration
Document 800-00919 Rev F 83
02/08
Using the Network Setup Screen for Network Connection
Figure 3-50 Network Setup Screen
Setting the Connection Type
Select the field beside Connection. Press to toggle between LAN and Modem.
Note If the RS-232C port is being used for another device, you can not
use it for network setup. You must reset this connection. See
Communicating with External Devices Using the RS-232C Port on
page 60.
Changing Network Passwords
Note These network passwords are case sensitive. The factory default
password for both the Network Administrator and the Network
User is 12345678.
Changing the Admin Password
1. Highlight the field beside Admin Password and press . A virtual keyboard
appears.
2. Enter the current password.