Filter
Top Products
Operation
108
Applying a Preset Camera Position
After you have set the camera presets, you can go directly to desired views.
1. Press QUAD/SEQUENCE to load the Preset Apply screen.
Figure 4-5 Preset Apply Screen
2. Select the desired preset number to load the preset.
Using Digital Zoom
Note You cannot enter the Digital Zoom mode when the selected
camera is Off, has lost video, or is set to Covert.
1. Press PTZ in the PTZ mode to enter the Digital Zoom Mode. If a PTZ device is not
installed, then press PTZ in the live monitoring mode to enter the Digital Zoom
Mode directly. A small, bright box appears over the image when you are in the
Digital Zoom mode. This box indicates the area to be enlarged.
2. Move the position of that box using the arrow buttons, and press to enlarge
that area. A displays on the enlarged screen.
3. Press PTZ again to return the DVR to the Live Monitoring mode.