Filter
Top Products
Configuration
Document 800-00919 Rev F 79
02/08
3. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Video Loss Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site in the case of video loss.
1. Highlight Video Loss Event Action (Notify) in the Event Action menu and press
. The Video Loss Event Action (Notify) setup screen appears.
Figure 3-47 Video Loss Event Action (Notify) Setup Screen
2. Highlight the Sched field and press . A schedule screen appears. Set the
schedule as described earlier see Scheduling an Alarm Output on page 59).
3. Highlight the Notify field and press to toggle between On and Off. When it is
On, the DVR notifies the remote site when the DVR loses video input from a
camera during a scheduled period of time.
4. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
When the DVR detects video loss, displays on each associated camera.
Setting Up the HRSD4 Displays
The DVR can be set up to display Date, Time, Title, and Status on screen. Each feature
can be turned On or Off. You can also adjust the margins.