Filter
Top Products
Configuration
96
Note The Admin and User passwords can have up to eight digits
using the camera buttons. The default Admin password is 4321.
Caution Write down the new password and save it in a secure place. If you
forget the password, you must reset the DVR using the Factory
Reset button. If you reset the DVR, you will lose all of your data
settings.
5. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Locking the Buttons on the Front Panel or Remote Control
Highlight Key Lock On and press . Once the buttons are locked, you can press any
button on the front panel or remote control to display a password screen with which you
can unlock the buttons.
Unlocking the Buttons on the Front Panel or Remote Control
Press any button on the front panel or remote control to display a password screen.
Enter the correct password to unlock the keys. The Key Lock password is 4321. You
can also use the Administrator password to unlock the keys.
Using the Config Screen
Use the Config menu to perform functions such as:
• switching between Quick Setup and Normal Setup
• copying/backing up video clips
• loading or saving a setup
• loading default setup
• clearing all data