Filter
Top Products
Configuration
76
Figure 3-43 Text-In Event Action (Alarm Out) Setup Screen
2. Highlight the Sched field and press . A schedule screen appears. Set the
schedule as described earlier (see Scheduling an Alarm Output on page 59).
3. Highlight the Alarm Out field and select either Beep or the alarm output terminal
that you want to associate with the text-in device.
4. Highlight the Dwell Time field and set the length of time you want the output
activated. You can select from 1 to 300 seconds.
5. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Text-In Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site in the case of text-in event.
Highlight Text-In Event Action (Notify) in the Event Action menu and press . The
Text-In Event Action (Notify) setup screen appears.
Figure 3-44 Text-In Event Action (Notify) Setup Screen
1. Highlight the Sched field and press . A schedule screen appears. Set the
schedule as described earlier see Scheduling an Alarm Output on page 59).