Filter
Top Products
Configuration
Document 800-00919 Rev F 95
02/08
A User password is required for the following actions:
• to enter playback
• to control fast forward playback and fast backward playback modes from live
monitoring mode
• to enter the search menu screen in live monitoring mode
1. Highlight Password in the Main menu and press to enter the Password
screen.
Figure 3-59 Password Setup Screen
2. Highlight the field beside User and press to toggle between On and Off.
If you set the password to On, you are asked to enter the current password so that
you can turn the Password function Off.
If you set the password to Off, you are asked to enter the new password and to
confirm it before the Password function is turned On.
Note The Administrator password cannot be turned On and Off.
Changing the Administrator Password
You can change the Administrator password by first entering the current password,
entering a new password, and then confirming the new password.
1. Highlight the Password field and press to change the password. A screen
appears asking you to enter the current password.
2. Enter the current password. If you enter the correct password, another screen
appears.
3. Use the camera buttons to enter the new password, and then press . Another
screen appears asking you to confirm the new password.
4. Confirm the new password.