Filter
Top Products
Configuration
52
2. Change the number by highlighting it and using the Up and Down arrow buttons
to increase and decrease the number. The PTZ ID number can be set from 0 to
256.
Setting the Alarm In Settings
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can:
• set up each input on the Alarm In Setup screen
• turn each input On (via Alarm I/O or Camera Alarm) or Off
• give each input a title
• independently set the inputs as NO (normally open) or NC (normally closed)
Highlight Alarm In in the Main menu and press . The Alarm In setup screen
appears.
Figure 3-21 Alarm In Setup Screen
To turn the Alarm In On or Off, and to change the setting from NC to NO,
Setting the Motion Detector
Your DVR has a built-in video motion detector. For each camera, you can:
• turn motion detection On and Off
• set the sensitivity level from 1 to 5
• select the image area to be monitored for motion detection
Highlight Motion Detector in the Main menu and press . The Motion Detector setup
screen appears.