Filter
Top Products
Configuration
Document 800-00919 Rev F 39
02/08
Figure 3-8 Virtual Keyboard
2. Use the arrows on the front of the DVR to highlight the first character you want in
the Site Title and press . That character appears in the title bar and the cursor
moves to the next position. You can use up to 20 characters, including spaces, in
your title.
Press to toggle between the upper and lower case keyboards.
Press to backspace.
Press to delete entered characters.
3. Highlight Close and press the button once you have entered your title.
Changing the Unit ID
The Unit ID number is used to identify the unit when it is networked with other DVRs.
You cannot use the same number for two or more DVRs that are within the same
network.
1. Highlight the field beside Unit ID in the System Information Change screen, then
press .
2. Change the number by highlighting it and using the Up and Down arrows to
increase and decrease the number.
Note When the Unit ID is set to 0, the infrared remote control can
control that DVR without any additional operations.
When the Unit ID is set from 1 to 4, you must press ID on the
remote control (1 to 4) to control that DVR.
When the Unit ID is set to 5 or higher, the infrared remote control
can not control any DVRs.
Changing the Language Setting
1. Highlight the field beside Language in the System Information Change Screen
and press . A drop-down menu appears listing the available languages.
2. Highlight the desired language and press .