Filter
Top Products
105105
Explanation Section
Maintenance
1. Cleaning the Instrument
● If the instrument gets dirty, wipe it with a soft dry cloth. Never use solvents such as thinner and benzene.
● If the measuring probe receptor’s objective lens gets dirty, wipe it with a soft dry cloth or lens cleaning paper.
● Should the instrument break down, do not try to disassemble it by yourself. Contact a Konica Minolta autho-
rized service facility.
2. Storing the Instrument
● The instrument and its optional accessories should be stored within the following temperature range. Do not
store them in areas subject to high temperatures and high humidity. For added safety, it is recommended that
they be stored with a drying agent (such as silica gel) at near room temperature.
• Main body and measuring probes
–20 to 55˚C
4-Probe Expansion Board CA-B04
● Take care not to allow condensation to form on the instrument during use.
When moving the instrument to the location where it is to be used, take care not to expose it to temperature
changes.
● When storing the optional 4-Probe Expansion Board CA-B04, always put it in the anti-static bag in which the
board is supplied.
SAFETY WARNING
(Failure to adhere to the following points may result in death or
serious injury.)
If you are not going to use the instrument for a long
time, disconnect the AC power cord from the AC
outlet. Dirt or water may accumulate on the prongs
of the AC power cord’s plug and it may cause a fire.
If there is any dirt or water on the prongs, it must be
removed.
Do not disassemble or modify the instrument.
Doing so may cause a fire or electric shock.
•Take special care not to allow liquid or metal ob-
jects to enter the instrument.
• Should liquid or metal objects enter the instru-
ment, turn the power OFF immediately, discon-
nect the AC cord from the AC outlet, and contact
the nearest Konica Minolta authorized service
facility.
Failure to observe this may cause a fire or electric
shock.
• The instrument should not be used if it is dam-
aged, or if smoke or odd smells occur.
• If smoke or odd smells occur or if the instrument
is damaged, turn the power OFF immediately, dis-
connect the AC cord from the AC outlet, and con-
tact the nearest Konica Minolta authorized ser-
vice facility.
Failure to observe this may result in a fire.