Filter
Top Products
MCUs MCU Management
Polycom, Inc. 149
MCU Procedures
To view information about an MCU
1 Go to Network > MCU > MCUs.
The MCUs list appears.
2 In the list, select the MCU and in the Actions list, click View Details.
The Device Details dialog box appears, displaying detailed information
about the MCU.
To add an MCU
1 Go to Network > MCU > MCUs.
2 In the Actions list, click Add.
3 In the Add MCU dialog box, complete the editable fields. See “Add MCU
Dialog Box” on page 137.
4 To set aside some of the MCU’s capacity for the Polycom CMA system’s
use, set Video ports reserved for CMA system and Voice ports reserved
for CMA system to the desired values (requires RMX v6.0 and above).
The ports reserved for the Polycom CMA system can be used by that
system for scheduled conferences.
5 To use a gateway-capable MCU as an ISDN gateway, select the Enable
gateway profiles check box and, on the Gateway Profiles tab, specify a
dial string delimiter and add one or more session profiles.
6 Click OK.
The new MCU appears in the MCUs list. If the MCU is configured as a
conferencing resource, it’s placed into service.
Note
See all the notes in “MCUs” on page 131.
Note
This feature is not for use with a Polycom RealPresence Resource Manager
system. The RealPresence Resource Manager system must have exclusive use of
any MCUs on which it directly schedules conferences. Those MCUs should not be
added to the DMA system’s conferencing resources.