Filter
Top Products
SNMP Procedures Polycom DMA System SNMP Support
Polycom, Inc. 441
SNMP Procedures
To enable and configure SNMP monitoring
1 Go to Admin > Local Cluster > SNMP Settings.
2 Select Enable SNMP monitoring and select an SNMP version. For
information on the SNMP versions, see “SNMP Overview” on page 431.
3 Configure the SNMP version, transport protocol, and other settings. If
using SNMPv3, configure the security user, authentication, and privacy
settings. For descriptions, see “SNMP Settings” on page 433.
4 To enable notifications (Traps or Informs) to specified users/hosts, do the
following:
a If using SNMPv3, add one or more notification users (see below).
b Add one or more notification agents (see below).
5 Click Update.
To add an SNMP notification user to a DMA system
1 Go to Admin > Local Cluster > SNMP Settings.
2 In the Notification Users section, click Add User.
3 Configure the settings in the Add Notification User dialog box. For
descriptions, see “Add Notification User Dialog Box” on page 436.
4 Click OK.
The user appears in the Notification Users list.
To add an SNMP notification agent to a DMA system
1 Go to Admin > Local Cluster > SNMP Settings.
2 In the Notification Agents section, click Add Agent.
3 In the Add Notification Agent dialog box, select Enable agent and
configure the settings for this agent. For descriptions, see “Add
Notification Agent Dialog Box” on page 439.
4 Click OK.
The agent appears in the Notification Agents list.
To download the MIB package for a DMA system
1 Go to Admin > SNMP Settings.
2 Click Download MIBs.